User Guide (Vixi Stream)

This is a user guide for Vixi Stream. Click here to view this page in a web browser.

Vixi Stream Setup

 
To access Vixi Stream, click on the three horizontal lines in the top left corner of the Vixi Suite and select Vixi Stream from the sidebar menu.

1. On the main menu, set the end time of the show by clicking Set End Time in the center of the screen. The end time can be extended later in the show if needed. After setting the time, click the “Start” button. There is a 5 minute countdown displayed while the servers start up. The system will be ready for use once the timer has reached 0:00 and the text "Status: LIVE" is displayed.

3. Next, click on the “Configure Show” show button to gather the necessary links to run the show.

4. The Camera Operator link can be copied using the “Copy” button under Camera A. This link should be sent to the operator, as it allows a user to stream live video to the system. Note that there are four cameras listed (A-D), but only one camera is available at this time. Additional cameras will be added in future releases.

5. The “Switcher Output” link consists of the live video feed originating from the phone. This link should be copied and output to the video board.